PLM
VISION GENERAL
The quick and easy to use Professional Lambda Meter (PLM) measures the air fuel ratio over a wide range of mixtures with fast response time. It has the power and configurability required for both development and tuning of emission controlled vehicles and for use in motorsport.
Sensor Compatibility
- Bosch LSU, 5 wire sensor
- NTK UEGO, 5 wire sensor
ESPECIFICACIONES BASICAS
Inputs/Outputs
- 2 x Digital inputs, user programmable as PLM-enable or RPM input
- 1 x Analogue voltage output, user programmable from 0 to 5 V, provided as differential voltage ranging from –4.8 to 5 V
- Power supply 7 to 16 V
- Input current
- 60 mA typical with backlight off
- 110 mA typical with backlight on
- plus sensor heater current (maximum 8 A)
Communications
- 1 x CAN
- 1 x RS232 for configuration only
Display
- LCD 3.5 digit
- Digit height 12.7 mm
- Green LED backlight
Connectors
- 2 x D9, 9 pin Dsub connector
Physical
- Dimension 105 x 41 x 25 mm (excluding connector)
- Weight 135 gram
Physical
- Case size 99 x 105 x 40 mm
- Weight
- 310 gram
- Connectors
- two part 60 pin waterproof connector with gold plated contacts
FUNCIONES
General
- CAN communications up to 1 Mbit
- RS232 communication for configuration
- Analogue output providing differential voltage
- Maximum 8 ampere sensor heater
- Multiple PLMs (up to 16) can be connected together
- Available as part of complete Lambda measurement kits
- Usable as an alternative to wideband Lambda upgrades in MoTeC ECUs and Dash Loggers
- 2 x 9 pin Dsub connector
- Robust aluminium enclosure
Measurement/Configuration
- Compatible fuel:
- Gasoline/petrol
- Alcohol
- LPG
- Diesel
- User defined ‘blend’ fuel
- Comprehensive diagnostic and status channels
- Calibration methods:
- Automatic, using the sensor’s built-in calibration resistor
- Manual table entry
- Known oxygen environment
- Calibration constant
- Standard configuration tables
- Configurable to compensate for sensor aging and contamination
- Accuracy +/– 1.5%
- Operating range:
- Lambda 0.7 to 32
- AFR 10.3 to 470 for gasoline/petrol
- Oxygen 0 to 22%
Display
- Display configurable to show Lambda, Air Fuel Ratio or equivalence ratio
- Flexible display setup configurable for
- Resolution (decimal points)
- Display update rate
- Display filtering
- Backlight intensity
- Easy to read 3.5 digit LCD with 12.7 mm (½») digit height
SOFTWARE
This Windows-based fully updatable software is user-friendly with an intuitive menu structure and extensive help screens.
Download free of charge the latest version.
PLM Manager is used for configuration, calibration and general management of the PLM.
KITS
Include PLM, Lambda sensor, loom, adaptor loom, weld-in bung, serial cable to provide PC connection.
- 15002 – PLM – KIT WITH NTK LAMBDA SENSOR 2.5 METRE
- 15002LL – PLM – KIT WITH NTK LAMBDA SENSOR 6 METRE
- 15006 – PLM: KIT WITH LSU 4.2 LAMBDA SENSOR 2.6 METER LOOM
- 15006LL – PLM: KIT WITH LSU 4.2 LAMBDA SENSOR 6 METER LOOM
- 15005 – PLM – KIT WITH LSU 4.9 LAMBDA SENSOR 2.5 METRE
- 15005LL – PLM – KIT WITH LSU 4.9 LAMBDA SENSOR 6 METRES
ACESORIOS
Cables
- 61070 – PC TO ECU COMMUNICATIONS CABLE D9 – RS232 ONLY
Lambda Sensors
- 57005 – BOSCH LSU 4.2 WIDEBAND LAMBDA SENSOR
- 57006 – BOSCH LSU 4.9 WIDEBAND LAMBDA SENSOR
- 57007 – NTK UEGO WIDEBAND LAMBDA SENSOR
PLM looms
- 61105 – PLM NTK ADAPTOR LOOM
- 61103 – PLM BOSCH LSU ADAPTOR LOOM
- 61104 –
- 61118 – PLM BOSCH LSU 4.9 ADAPTOR LOOM
- 61106 – PLM COMMON LOOM 2.6 METRE
- 61107 – PLM COMMON LOOM 6 METRE
Lambda Sensor Accessories
- 59001 – LAMBDA BUNG MILD STEEL WELD-IN 18 x 1.5
- 59002 – LAMBDA BUNG STAINLESS STEEL WELD-IN 18 x 1.5
- 64010 – LAMBDA CONNECTOR KIT BOSCH LSU 4.9
- 61044 – M800 PLUG-IN LAMBDA LOOM
- 61220 – LAMBDA SENSOR EXTENSION LOOM FOR NTK E1 0.55 METRES
- 64009 – LAMBDA CONNECTOR KIT BOSCH LSU 4.2
- 65042 – 8 PIN CONNECTOR KIT FOR NTK UEGO FEMALE
- 65085 – 8 PIN CONNECTOR KIT FOR NTK UEGO MALE