IEX

VISION GENERAL

The Ignition Expander module (IEX) is designed to increase the ignition output capacity of MoTeC ECUs.

The IEX connects to a single ignition output on the ECU and can drive up to 8 ignition modules. For 10 and 12 coil applications, two IEX units can be used.

Note that the IEX does not drive the coil directly, an ignition module is still required.

An IEX is not a stand-alone device.

Compatible with
  • M4, M48, M8, M84, M400, M600, M800, M880
  • Not compatible with M1 Series ECUs

ESPECIFICACIONES

Outputs
  • 8 x ignition outputs
    • Suits most ignition modules of falling edge type
    • The dwell time is controlled by the ECU
    • For 10 and 12 coil applications, two IEX units can be used
Communications
  • MoTeC specific coded signal supplied from a single ignition output on the ECU
Physical
  • Case size 70 x 100 x 35 mm
  • Weight 220 gram
  • 18 pin waterproof connector with gold plated contacts

DIRECTORIO

IEX

Part No: #14001

Ignition Expander

18 Way M8/IEX/TCMUX/CDI/4 Connector

Part No: #65018

DESCARGAS

NameVersion / PartPublishedDownload
IEX Ignition Expander – Wiring Diagram14001jul 2004DOWNLOAD
IEX Ignition Expander 12 coils – Wiring Diagram14001jul 2004DOWNLOAD