VISIÓN GENERAL
The C187 comes standard as a combined 7″ full colour display and powerful control device and fully programmable data logger with 250 MB internal memory. Optional USB Logging provides additional data capacity and flexibility, and also upgrades the internal memory to 500MB.
The anti-reflective, high contrast display is clear and vibrant in direct sunlight. Numerous supplied display layouts offer fixed graphics with configurable channels and labels.The optional Display Creator software provides the tools for full screen customisation.
The C187 aquires data from other devices, such as an ECU, displaying data channels, warning alarms, lap times, fuel calculations, maths functions and more.
FUNCIONALIDADES
- Impressive High Resolution 178 mm (approx. 7″) colour LCD display
- High brightness for sunlight readability
- Optional USB logging (includes 500 MB Internal Logging)
- 16 full colour (RGB) LEDs; colour, function and intensity are fully programmable
- Suitable for cars, marine and industrial applications
- Supports Wideband Lambda from MoTeC PLMs or LTCs
- Easily integrates with MoTeC CAN based devices such as ECUs and expanders. Full I/O expansion with E888 and E816
- GPS Lap Timing
- Tell Tales
- Diagnostic Logging
- Preserved Channels
- Running Min/Max, Timers, PID Control, Engine Log
- Supports T2 Telemetry (Optional)
- 3 x Composite video inputs for live on-screen video, e.g. from a rear view camera
- IP67 rated housing and diffused LED lights
ACCESORIOS
- 62206 – C187 LOOM
- 61279 – CABLE USB LOGGING 1.5M (PANEL MOUNT)
- 61280 – 32 GB USB DATA PLUG
- 61292 – 32 GB USB3 FLASH DRIVE
- 61402 – 32 GB AUTOSPORT USB DATA PLUG
- 61403 – CABLE, AUTOSPORT USB LOGGING 1.5M (PANEL MOUNT)
ESPECIFICACIONES
Display
- Screen: Colour TFT LCD, anti-reflective
- Resolution: 800 x 480 resolution, anti-aliased graphics
- Layouts: selectable fixed layouts (user programmable layouts via optional Display Creator software)
- 48 user-defined, scrollable message lines with programmable overrides
- 3 programmable modes with customisable labels
Logging
- 250 MB internal logging memory
- Optional USB logging to a removable storage device
- Includes upgrade to 500MB internal memory
- Logging rates up to 1000 samples per second
- Fast Ethernet download
- i2 Standard data analysis software included (Pro Analysis upgrade available)
Removable USB Storage Device Options
- Kingston 32 GB USB3 Flash Drive – fast, low weight and low cost, not mechanically latched or waterproof.
- MoTeC 32 GB USB3 Data Plug – mechanically latched, waterproof with anodised housing, ideal for exposure to the elements and vibration.
- Alternative USB storage devices may be used but are not recommended.
Inputs
(*Denotes number available with I/O upgrade)
- 10 (20*) analogue voltage inputs:
- 4 (8*) 0 to 5.46 V, 1.33 mV resolution
- 6 (12*) x 0 to 15.0 V, 3.66 mV resolution
- 4 (8*) Analogue temperature inputs
- 0 to 15.0 V, 3.66 mV resolution
- 4 x Digital inputs
- 2 x Switch inputs
- 4 x Speed inputs
- 3 x Composite video inputs
Outputs
- 6 x low side outputs PWM or switched operation
- 1.0 Amp max, current limited and thermal overload protected
Expanders
- Compatible with E816, E888, VIM and SVIM Expanders.
Internal Sensors
- 3-axis accelerometer, detection range: +/- 5G
- Dash temperature sensor
- Sensor supply voltage
- Battery voltage
Communications
- 4 x configurable CAN buses, with individually programmable CAN bus speeds. One can be used as RS232 Receive. Two buses support VIM/SVIM Expanders.
- 2 x Dedicated RS232 ports.
Power supply
- Operating voltage: 6 to 32 V DC
- Operating current: 0.5 A typical at 14 V (excl. sensor currents)
- Reverse battery protection
- Battery transient protection
Sensor supply currents
- 5 V sensor supply: 0.25 A maximum
- 8 V sensor supply: 0.25 A maximum
Operating temperature
- Internal: -20 °C to 70 °C (above 60 °C maximum backlight brightness progressively reduced)
- Typical ambient temperature range in free air: -20 °C to 55 °C
Ingress Protection (IP) Rating
- The device is rated to IP67
IP rating is dependant upon the user ensuring that the connector entries are waterproof, which, as a minimum, requires all unused wire cavities on the connector to be plugged.
Physical
For size and weight of P/N 18051 please refer to CDS18051 Click here.
- Size: 196.2 x 122.5 x 26.3 mm excluding connectors
- Weight 755 g
- 1 x 79 pin Autosport connector
- 1 x mini USB port (located on the back of the device)
COMPATIBILIDAD
- MoTeC ECUs: All models (some earlier models may require an additional adaptor in conjunction with the RS232 adaptor)
- MoTeC Displays/Loggers: All
- MoTeC Expanders: E816, E888 , VIM and SVIM expanders.
- MoTeC Accessories: SLM, PLM, LTC, BR2, PDM, GPS, ADR2, V2 etc.
- Many non-MoTeC devices
SOFTWARE
- Microsoft Windows based software
- Dash Manager used for setup and management of the display and data logging system, providing:
- Configuration of the inputs, ouputs, LEDs, display, data logging and calculations.
- Offline generation of a configuration file that can then be sent to the device.
- Channel monitoring
- Firmware updating and extensive help screens
- Display Creator* allows for full customisation of the screen layout, including live video.
- i2 Data Analysis software provides the tools for comprehensive data analysis. Standard or Pro* version available
- T2 Telemetry* software
(* available via upgrades )
CABLEADO DE ETHERNET
This pinout is suitable for cables identified as Revision: A and Revision: B on the affixed label.Note: Check the revision of the cable (identified on the label) before using the relevant pinout information from the table.
| RJ45 | M170/M182/M190 | L180/C185/C187/C1812 | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Pin | Function | Revision | MoTeC Colour | Pin Numbering | M170 Pin | M182/M190 Pin | Function | L180/C185/ C187/C1812 Pin | Function |
| 1 | Ethernet TX+ | Rev A & Rev B | Orange-White |  | 55 | C33 | Ethernet RX+ | 77 | Ethernet RX+ |
| 2 | Ethernet TX– | Rev A & Rev B | Orange | 61 | C26 | Ethernet RX– | 78 | Ethernet RX– | |
| 3 | Ethernet RX+ | Rev A | Green-White | 48 | C41 | Ethernet TX+ | 67 | Ethernet TX+ | |
| Rev B | Green | ||||||||
| 6 | Ethernet RX– | Rev A | Green | 47 | C34 | Ethernet TX– | 68 | Ethernet TX– | |
| Rev B | Green-White | ||||||||
PINOUT
Mating Connector: Part number 68086
| Pin | Name | Standard Function |
|---|---|---|
| 1 | AV15 | Analogue Voltage Input 15 (with I/O upgrade) |
| 2 | AV16 | Analogue Voltage Input 16 (with I/O upgrade) |
| 3 | AV17 | Analogue Voltage Input 17 (with I/O upgrade) |
| 4 | AV18 | Analogue Voltage Input 18 (with I/O upgrade) |
| 5 | AV19 | Analogue Voltage Input 19 (with I/O upgrade) |
| 6 | 0V | Sensor 0 V |
| 7 | BAT– | Battery Negative |
| 8 | BAT+ | Battery Positive |
| 9 | AUX1 | Auxiliary Output 1 |
| 10 | AUX2 | Auxiliary Output 2 |
| 11 | AUX3 | Auxiliary Output 3 |
| 12 | AUX4 | Auxiliary Output 4 |
| 13 | AUX5 | Auxiliary Output 5 |
| 14 | AUX6 | Auxiliary Output 6 |
| 15 | RS232-2 TX | RS232-2 Transmit Output |
| 16 | RS232-2 RX | RS232-2 Receive Input |
| 17 | 0V | Sensor 0 V |
| 18 | 5V | Sensor 5 V |
| 19 | AV7 | Analogue Voltage Input 7 |
| 20 | AV8 | Analogue Voltage Input 8 |
| 21 | AV9 | Analogue Voltage Input 9 |
| 22 | AV10 | Analogue Voltage Input 10 |
| 23 | AV11 | Analogue Voltage Input 11 (with I/O upgrade) |
| 24 | AV12 | Analogue Voltage Input 12 (with I/O upgrade) |
| 25 | AV13 | Analogue Voltage Input 13 (with I/O upgrade) |
| 26 | AV14 | Analogue Voltage Input 14 (with I/O upgrade) |
| 27 | 0V | Sensor 0 V |
| 28 | 5V | Sensor 5 V |
| 29 | VID1 | Video Input 1 |
| 30 | VID0V | Video 0 V |
| 31 | VID2 | Video Input 2 |
| 32 | VID3 | Video Input 3 |
| 33 | 0V | Sensor 0 V |
| 34 | AT1 | Analogue Temp Input 1 |
| 35 | AT2 | Analogue Temp Input 2 |
| 36 | AT3 | Analogue Temp Input 3 |
| 37 | AT4 | Analogue Temp Input 4 |
| 38 | AT5 | Analogue Temp Input 5 (with I/O upgrade) |
| 39 | AT6 | Analogue Temp Input 6 (with I/O upgrade) |
| 40 | 0V | Sensor 0 V |
| 41 | AT7 | Analogue Temp Input 7 (with I/O upgrade) |
| 42 | AT8 | Analogue Temp Input 8 (with I/O upgrade) |
| 43 | 0V | Sensor 0 V |
| 44 | 5V | Sensor 5 V |
| 45 | AV1 | Analogue Voltage Input 1 |
| 46 | AV2 | Analogue Voltage Input 2 |
| 47 | AV3 | Analogue Voltage Input 3 |
| 48 | AV4 | Analogue Voltage Input 4 |
| 49 | AV5 | Analogue Voltage Input 5 |
| 50 | AV6 | Analogue Voltage Input 6 |
| 51 | 0V | Sensor 0 V |
| 52 | DIG1 | Digital Input 1 |
| 53 | DIG2 | Digital Input 2 |
| 54 | DIG3 | Digital Input 3 |
| 55 | DIG4 | Digital Input 4 |
| 56 | 0V | Sensor 0 V |
| 57 | SW1 | Switch Input 1 |
| 58 | SW2 | Switch Input 2 |
| 59 | CAN4L | CAN 4 Low |
| 60 | CAN4H | CAN 4 High |
| 61 | 0V | Sensor 0 V |
| 62 | 8V | Sensor 8 V |
| 63 | SPD1 | Speed Input 1 |
| 64 | SPD2 | Speed Input 2 |
| 65 | SPD3 | Speed Input 3 |
| 66 | SPD4 | Speed Input 4 |
| 67 | E-TX+ | Ethernet Transmit + |
| 68 | E-TX- | Ethernet Transmit – |
| 69 | AV20 | Analogue Voltage Input 20 (with I/O upgrade) |
| 70 | RS232-1 TX | RS232 Transmit Output |
| 71 | CAN3L | CAN 3 Lo |
| 72 | CAN3H | CAN 3 Hi |
| 73 | CAN1L | CAN 1 Lo |
| 74 | CAN1H | CAN 1 Hi |
| 75 | CAN2L | CAN 2 Lo/RS232 Ground Input |
| 76 | CAN2H | CAN 2 Hi/RS232 Receive Input |
| 77 | E-RX+ | Ethernet Receive + |
| 78 | E-RX– | Ethernet Receive – |
| 79 | RS232-1 RX | RS232 Receive Input |
MANUAL
| Name | Version / Part | Published | Download |
| C187 User Manual | 18051 / 18072 | may 2018 | DOWNLOAD |