VISIÓN GENERAL
The C125 comes standard as a combined 5″ full colour display and powerful control device with outstanding readability in direct sunlight. With the addition of the Data Logging upgrade it becomes a fully programmable data logger with 120 MB memory. Optional USB Logging provides additional data capacity and flexibility.
Numerous supplied display layouts offer fixed graphics with configurable channels and labels, while the optional Display Creator software provides the tools for full screen customisation.
The C125 acquires data from other devices, such as an ECU, and can display data channels, warning alarms, lap times, fuel calculations, minimum corner speeds, maximum straight speeds and more.
CARACTERISTICAS
- Impressive High Resolution 125 mm (approx. 5″) colour LCD display
- High brightness for sunlight readability
- Optional internal logging and USB logging
- 10 full colour (RGB) LEDs; colour, function and intensity are fully programmable
- Suitable for bikes, cars, marine and industrial applications
- Supports Wideband Lambda from MoTeC PLMs or LTCs
- Easily integrates with MoTeC CAN based devices such as ECUs and expanders. Full I/O expansion with E888 and E816
- GPS Lap Timing
- Supports T2 Telemetry (with upgrade)
- IP67 rated housing
- A composite video input allows for a live on-screen footage, for example from a rear view camera (requires Display Creator)
ACCESORIOS
- 62204 – C125 RACE TERMINATED LOOM
- 61259 – C125 INPUT LOOM
- 61260 – C125 ACCESSORY KIT WITH LOOM
- 61279 – CABLE USB LOGGING 1.5M (PANEL MOUNT)
- 61403 – CABLE, AUTOSPORT USB LOGGING 1.5M (PANEL MOUNT)
- 61280 – 32 GB USB DATA PLUG
- 61292 – 32 GB USB3 FLASH DRIVE
MEJORAS ADICIONALES
- 29600 – C125 I/O
- 29618 – C125 120MB LOGGING
- 29614 – C125 USB LOGGING
- 29616 – C125 DISPLAY CREATOR
- 29620 – C125 PRO ANALYSIS
- 29623 – C125 T2 TELEMETRY
ESPECIFICACIONES
Display
- Screen: Colour TFT LCD, anti-reflective
- Resolution: 800 x 480 resolution, anti-aliased graphics
- Layouts: selectable fixed layouts (user programmable layouts via optional Display Creator software)
- 48 user-defined, scrollable message lines with programmable overrides
- 3 programmable modes with customisable labels
Logging – optional (requires upgrades)
- 120 MB internal logging memory
- USB logging to a removable storage device
- Logging rates up to 500 samples per second
- Fast Ethernet download
- i2 Standard data analysis software included (Pro Analysis upgrade available)
Removable USB Storage Device Options
- Kingston 32 GB USB3 Flash Drive – fast, low weight and low cost, not mechanically latched or waterproof.
- MoTeC 32 GB USB3 Data Plug – mechanically latched, waterproof with anodised housing, ideal for exposure to the elements and vibration.
- Alternative USB storage devices may be used but are not recommended.
Inputs
- 2 x Digital inputs
- 3 x Speed inputs
- 1 x Composite video input
Inputs – optional (requires I/O upgrade)
- 6 x Analogue voltage inputs
- 4 x 0 to 5.46 V, 1.33 mV resolution
- 2 x 0 to 15.0 V, 3.66 mV resolution
- 2 Analogue temperature inputs
- 2 x 0 to 15.0 V, 3.66 mV resolution
Outputs – optional (requires I/O upgrade)
- 4 x low side outputs PWM or switched operation
- 0.5 Amp max, current limited and thermal overload protected
Expanders
- Compatible with E816 and E888 expanders (providing full functional use)
Internal Sensors
- 3-axis accelerometer, detection range: +/- 5G
- Dash temperature sensor
- Sensor supply voltage
- Battery voltage
Communications
- 2 x configurable CAN buses, with individually programmable CAN bus speeds.
- 2 x RS232 ports, one with transmit and receive, one with receive only.
Power supply
- Operating voltage: 6 to 32 V DC
- Operating current: 0.5 A typical at 14 V (excl. sensor currents)
- Reverse battery protection
- Battery transient protection
Sensor supply currents
- 5 V sensor supply: 0.25 A maximum
- 8 V sensor supply: 0.25 A maximum
Operating temperature
- Internal: -20 °C to 70 °C (above 60 °C maximum backlight brightness progressively reduced)
- Typical ambient temperature range in free air: -20 °C to 55 °C
Ingress Protection (IP) Rating
- The device is rated to IP67
- Physical
- For size and weight of P/N 18060 please refer to CDS18060 Click here.
- Size: 134.5 x 101.8 x 21.1 mm excluding connector
- Weight 385 g
- 1 x 34 pin waterproof connector
- 1 x mini USB port (located on the back of the device)
COMPATIBILIDAD
- MoTeC ECUs: All models (some earlier models may require an additional adaptor in conjunction with the RS232 adaptor)
- MoTeC Displays/Loggers: All
- MoTeC Expanders: E816 and, E888 expanders.
- MoTeC Accessories: SLM, PLM, LTC, BR2, PDM, GPS, ADR2, V2 etc.
- Many non-MoTeC devices
PROGRAMA
- Microsoft Windows based software
- Dash Manager used for setup and management of the display and data logging system, providing:
- Configuration of the inputs, ouputs, LEDs, display, data logging and calculations.
- Offline generation of a configuration file that can then be sent to the device.
- Channel monitoring
- Firmware updating and extensive help screens
- Display Creator* allows for full customisation of the screen layout, including live video.
- i2 Data Analysis software provides the tools for comprehensive data analysis. Standard or Pro* version available
- T2 Telemetry* software
(* available via upgrades )
CABLEADO ETHERNET
This pinout is suitable for cables identified as Revision: A and Revision: B on the affixed label.Note: Check the revision of the cable (identified on the label) before using the relevant pinout information from the table.
| RJ45 | M122/M130/M142/M150 | CDL3/C125/C127/ C1212/L120 | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Pin | Function | Revision | MoTeC Colour | Pin Numbering | M122/ M130 Pin | M142/M150 Pin | Function | Pin | Function |
| 1 | Ethernet TX+ | Rev A & Rev B | Orange-White |  | B25 | D25 | Ethernet RX+ | 11 | Ethernet RX+ |
| 2 | Ethernet TX– | Rev A & Rev B | Orange | B26 | D26 | Ethernet RX– | 10 | Ethernet RX– | |
| 3 | Ethernet RX+ | Rev A | Green-White | B23 | D23 | Ethernet TX+ | 2 | Ethernet TX+ | |
| Rev B | Green | ||||||||
| 6 | Ethernet RX– | Rev A | Green | B24 | D24 | Ethernet TX– | 1 | Ethernet TX– | |
| Rev B | Green-White | ||||||||
CABLEADO CAN
DIMENSIONES Y MONTAJE
PINOUT
Mating Connector: Part number 65044
| Pin | Name | Standard Function |
|---|---|---|
| 1 | E-TX– | Ethernet Transmit – |
| 2 | E-TX+ | Ethernet Transmit + |
| 3 | AV1 | Analogue Voltage Input 1 (with I/O upgrade) |
| 4 | AV2 | Analogue Voltage Input 2 (with I/O upgrade) |
| 5 | AV3 | Analogue Voltage Input 3 (with I/O upgrade) |
| 6 | AV4 | Analogue Voltage Input 4 (with I/O upgrade) |
| 7 | 8V | Sensor 8 V |
| 8 | 5V | Sensor 5 V |
| 9 | 0V | Sensor 0 V |
| 10 | E-RX– | Ethernet Receive – |
| 11 | E-RX+ | Ethernet Receive + |
| 12 | AV5 | Analogue Voltage Input 5 (with I/O upgrade) |
| 13 | AV6 | Analogue Voltage Input 6 (with I/O upgrade) |
| 14 | DIG1 | Digital Input 1 |
| 15 | DIG2 | Digital Input 2 |
| 16 | AT1 | Analogue Temp Input 1 (with I/O upgrade) |
| 17 | AT2 | Analogue Temp Input 2 (with I/O upgrade) |
| 18 | CAN1L | CAN1 Lo |
| 19 | CAN1H | CAN1 Hi |
| 20 | RS232-1 TX | RS232-1 Transmit |
| 21 | SPD1 | Speed Input 1 |
| 22 | SPD2 | Speed Input 2 |
| 23 | SPD3 | Speed Input 3 |
| 24 | VID1 | Video Input 1 * |
| 25 | RS232-2 RX | RS232-2 Receive |
| 26 | CAN2L | CAN2 Lo/RS232 Ground Input |
| 27 | CAN2H | CAN2 Hi/RS232 Receive |
| 28 | RS232-1 RX | RS232-1 Receive Input |
| 29 | AUX1 | Auxiliary Output 1 (with I/O upgrade) |
| 30 | AUX2 | Auxiliary Output 2 (with I/O upgrade) |
| 31 | AUX3 | Auxiliary Output 3 (with I/O upgrade) |
| 32 | AUX4 | Auxiliary Output 4 |
| 33 | BAT+ | Battery Positive |
| 34 | BAT– | Battery Negative |