VISIÓN GENERAL
The D175 Display is part of MoTeC’s D1 Series. This configurable and high brightness colour display is readable in direct sunlight and includes an integrated LED array; it is used with M1 ECUs and Dash/Enclosed Loggers.
Selectable fixed display layouts offer multiple style options or use Display Creator software for full screen customisation.
CARACTERISTICA
- High resolution colour LCD display
- Display size 125mm (5″ approx)
- High brightness for sunlight readability
- 10 full colour (RGB) LEDs; colour, function and intensity are fully programmable
- 8 analogue inputs
- Autosport connector
- Receives data from M1 ECUs and Dash/Enclosed Loggers via CAN
- Sends input data to other devices via CAN
ESPECIFICACIONES
Analogue inputs
- Amount: 8 (can be used for switches or potentiometers)
- Measurement range: 0V to 4V
- Maximum operating voltage: 17V *
- Maximum protected voltage: 32V
- Input equivalent: 10kΩ to 4.0V
* Above this voltage other inputs may be affected.
Power supply
- Operating voltage: 6.5V to 32V
- Operating current: 380mA (typical) at 14V, full brightness
- Reverse battery protected
Communications
- CAN 1 Mbit/sec
Display
- Type: TFT LCD, anti-reflective
- Resolution: 600 x 480, anti-aliased graphics
- Brightness: controlled via CAN message, 100 steps
- Display Creator software provides the tools for full screen customisation
- Selectable fixed layouts.
LED array
- 10 RGB LEDs
- Colour, function and intensity are fully programmable.
Operating temperature
- Internal: -20°C to 70°C (above 60°C maximum backlight brightness progressively reduced)
- Typical maximum ambient temperature in free air: 55°C
Physical
- Weight: 320gms (excluding wiring)
- Anodised aluminium housing
COMPATIBILIDAD
- MoTeC ECUs: All models that support CAN communication
- MoTeC Displays/Loggers: All
SOFTWARE
- Microsoft Windows based software
- Display Creator allows for full customisation of the screen layout
- Dash Manager used for setup and management of the display when combined with a C series Display/Display Logger
DIMENSIONES Y MONTAJE
PINOUT
Mating connector: MoTeC #65048
| Pin Number | Name | Function |
|---|---|---|
| 1 | Bat Neg | Battery Negative |
| 2 | Bat Pos | Battery Positive |
| 3 | CAN LO * | CAN Bus Low |
| 4 | CAN HI * | CAN Bus High |
| 8 | 0V | Sensor 0 Volts |
| 13 | AN1 | Analogue Input 1 |
| 14 | AN2 | Analogue Input 2 |
| 15 | AN3 | Analogue Input 3 |
| 16 | AN4 | Analogue Input 4 |
| 17 | AN5 | Analogue Input 5 |
| 18 | AN6 | Analogue Input 6 |
| 20 | AN7 | Analogue Input 7 |
| 22 | AN8 | Analogue Input 8 |
* The CAN wires must be twisted together.