ACC-COMMS-CABLES – Motec Latinoamerica

COMMS CABLES

VISION GENERAL

Most MoTeC devices need to be connected to a PC or laptop to configure the device or to download data from the device.

To find the required connection hardware, look up the device that needs to be connected in the following table and the corresponding MoTeC Device Port.

The preferred connection method will determine the PC port to connect to and the hardware required to do so. If this preferred PC port is not available, there may be an alternative connection method.

PC – preferred connection method
AC – alternative connection method
S – connection using alternative device port (slow)

MoTeC Device Port	Serial Logic Level		Serial RS232		CAN		USB	Ethernet
PC Port	Serial	USB	Serial	USB	Parallel	USB	USB	Ethernet
Connection Hardware	PCI or CIM	PCI or CIM + USB to Serial	Serial Cable	Serial Cable + USB to Serial	CAN Cable	UTC	USB Cable	Ethernet Cable
ECUs
M4 serial numbers <3000M48, M8	PC	AC
M4 serial numbers >3000M2R, MLS			PC	AC
M84, M400, M600, M800, M880, Plug-ins					AC	PC
M1								PC
Display and Logging
C125								PC
CDL3								PC
SDL3								PC
SDL					S	S	PC
ADL3, EDL3								PC
ADL2, EDL2			S	S	S	S	PC
ADL, EDL			S	S	AC	PC
ACL								PC
Other Products
PLM			PC	AC
LTC, LTCD						PC
BR2, DBW4					AC	PC
MDC, MDC2, SDC, SDC2, SDC3					AC	PC
PDM16, PDM32, PDM15, PDM30						PC
RTC					PC
Telemetry			PC	AC